AERO TUBES

AERO TUBES (AQUA CULTURE EQUIPMENTS)

Most required for today's shrimp culture is Aero-Tube. These tubes are manufactured by Colorite Plastics of USA. Tubes are available to the farmers along with know how This tube saves lots of energy and thus cost of production for the farmer for shrimp culture comes down by 35% in electricity alone. Aero-Tube are used in different shapes of grids.

Geekay hatcheries are the professionals to introduce this tube in India after lots of research being done. These tubes are now being used not only in Andhra Pradesh but also in Kerala Tamilnadu Gujarat and Goa. It is expected by 2013 end there is going to be a transformation to aero tubes from paddle segment.

On introduction of Aero-Tube the cost saving to farmer is shown below

AERATOR   (PADDLE WHEELS)	AERO-TUBE
Mechanical aeration	Aerator
Water pumped in to air	Air pushed in to water
Pushing water	Pushing air
More power	Less power
SOTR is less (Standard Oxygen Transfer Rate) 1.7kG	SOTR is high   3.7 HG
Big bubbles 20mm	2mm small bubbles
To be fixed in one place	Can fix in any corner
Should put off when feeding	Need not put off while feeding
Wastage of feed is more	Less wastage
Water contamination is more	Water contamination is less

PADDLE WHEEL AERATORS

PADDLE WHEEL AERATORS

We offer Paddle Wheel Aerator imported from Taiwan from the company Sino aqua machinery inc. Sino aqua machinery inc is worlds leading manufacturer of impellers and paddle wheel aerators. We also sell all spare parts of impeller aerators.

We develop high efficiency electric motor with low power consumption and metal gear system for 2 hp Paddle Wheel Aerator. This electric motor work in low voltage and in high voltage also.. All UV resistance plastic parts better life in sunlight also. This way, we serve quality product to Aquaculture industries.

2HP  Aerator Set :-

2HP Self Cooling Motor, Gear Box, Float, Impeller, Nylon Tripod, HDPE Cover, SS-304 Frame, Shaft & Nut-Bolt, 

2HP  AERATOR SPECIFICATION :-

♦ Rated Power	1.5k.w
♦ Phase	3HP
♦ Voltage	415V_+10V
♦ Rated Frequency	50hHz
♦ Speed (RPM)	1440 RPM

Material Specification / Descriptions :-

♦ 2HP SELF COOLING & POWER SAVER MOTOR	1Nos.
♦ CAST IRON BODY WITH BRONZE GEAR BOX	1Nos.
♦ HDPE/FRP MAKE MOTOR COVER	1Nos.
♦ HDPE BLOW FLOAT	3Nos.
♦ STAINLESS STEEL 304  FRAME	1Nos.
♦ STAINLESS STEEL 304  SHAFT	2Nos.
♦ CAST IRON MAKE MOVEBLE JOINT	2Nos.
♦ PPCP IMPELLER	4Nos.
♦ NYLON TRIPODE :	2Nos.
♦ STAINLESS STEEL 304 MAKE BOLT & NUT	1SET

Features:

·         Paddle Wheel Aerators are used instead of worm gears, thereby economizing on energy with high efficiency and saving over 20% electric energy over traditional models

·         The accrual-bevel gear is made of chromium-manganese-titanium with carbon-nitride surface treatment. This ensures long usage life spans and high rigidity

·         A mechanical seal is available to prevent oil leakage

·         Inside protectors are available to avoid the motor being accidentally burnt out

·         PE floats, nylon impellers, and stainless steel shafts and frames are available

·         Our paddle wheel aerators are greatly improved and produced according to the newest international technologies. Adopting whole plastic floats, these aerators have stainless steel transmission shafts and frames

·         With oxygen transfer rates of 2.59 kg (O₂)/h, 36.3% higher than the standard, power efficiency is 1.71 kg (O₂)/kWh, 36.8% higher than the standard Packing Carton