Thursday 14 May 2015

RAINBOW EPOXY PAINTS

RAINBOW EPOXY PAINTS








The food grade epoxy paints are used in lots of shrimp hatcheries, Water tanks of leading Building construction companies. Lots of green houses and corporate have adopted Food Grade epoxy paint with FDI certification for their use in water storage places. The miracle of Yung Chi epoxy paint is that the odour of the paint vanishes so fast than the domestic epoxy paints and the paint flavour never merges with drinking water. The durability and sustained binding capacity of the paint to the surface is highly remarkable in Yung Chi products, one of the largest epoxy paint manufacturers in the world.

Sunday 26 April 2015

AERO TUBES


AERO TUBES (AQUA CULTURE EQUIPMENTS)

Most required for today's shrimp culture is Aero-Tube. These tubes are manufactured by Colorite Plastics of USA. Tubes are available to the farmers along with know how This tube saves lots of energy and thus cost of production for the farmer for shrimp culture comes down by 35% in electricity alone. Aero-Tube are used in different shapes of grids.


Geekay hatcheries are the professionals to introduce this tube in India after lots of research being done. These tubes are now being used not only in Andhra Pradesh but also in Kerala Tamilnadu Gujarat and Goa. It is expected by 2013 end there is going to be a transformation to aero tubes from paddle segment.



On introduction of Aero-Tube the cost saving to farmer is shown below

AERATOR   (PADDLE WHEELS)
AERO-TUBE
Mechanical aerationAerator
Water pumped in to airAir pushed in to water
Pushing water Pushing air
More power Less power
SOTR is less
(Standard Oxygen Transfer Rate) 1.7kG
SOTR is high
  3.7 HG
Big bubbles 20mm 2mm small bubbles
To be fixed in one place Can fix in any corner
Should put off when feedingNeed not put off while feeding
Wastage of feed is moreLess wastage
Water contamination is moreWater contamination is less
















PADDLE WHEEL AERATORS

PADDLE WHEEL AERATORS





We offer Paddle Wheel Aerator imported from Taiwan from the company Sino aqua machinery inc. Sino aqua machinery inc is worlds leading manufacturer of impellers and paddle wheel aerators. We also sell all spare parts of impeller aerators.


We develop high efficiency electric motor with low power consumption and metal gear system for 2 hp Paddle Wheel Aerator. This electric motor work in low voltage and in high voltage also.. All UV resistance plastic parts better life in sunlight also. This way, we serve quality product to Aquaculture industries.

2HP  Aerator Set :-

2HP Self Cooling Motor, Gear Box, Float, Impeller, Nylon Tripod, HDPE Cover, SS-304 Frame, Shaft & Nut-Bolt, 

2HP  AERATOR SPECIFICATION :-
♦ Rated Power
1.5k.w
♦ Phase
3HP
♦ Voltage
415V_+10V
♦ Rated Frequency
50hHz
♦ Speed (RPM)
1440 RPM


Material Specification / Descriptions :-

2HP SELF COOLING & POWER SAVER MOTOR
1Nos.
♦ CAST IRON BODY WITH BRONZE GEAR BOX
1Nos.
♦ HDPE/FRP MAKE MOTOR COVER
1Nos.
♦ HDPE BLOW FLOAT
3Nos.
♦ STAINLESS STEEL 304  FRAME
1Nos.
♦ STAINLESS STEEL 304  SHAFT
2Nos.
♦ CAST IRON MAKE MOVEBLE JOINT
2Nos.
♦ PPCP IMPELLER
4Nos.
♦ NYLON TRIPODE :
2Nos.
♦ STAINLESS STEEL 304 MAKE BOLT & NUT
1SET


Features:

·         Paddle Wheel Aerators are used instead of worm gears, thereby economizing on energy with high efficiency and saving over 20% electric energy over traditional models

·         The accrual-bevel gear is made of chromium-manganese-titanium with carbon-nitride surface treatment. This ensures long usage life spans and high rigidity

·         A mechanical seal is available to prevent oil leakage

·         Inside protectors are available to avoid the motor being accidentally burnt out
·         PE floats, nylon impellers, and stainless steel shafts and frames are available

·         Our paddle wheel aerators are greatly improved and produced according to the newest international technologies. Adopting whole plastic floats, these aerators have stainless steel transmission shafts and frames

·         With oxygen transfer rates of 2.59 kg (O2)/h, 36.3% higher than the standard, power efficiency is 1.71 kg (O2)/kWh, 36.8% higher than the standard Packing Carton